We are proud to announce that our long-term European partner—a professional signage and large-format print finisher in Switzerland—has successfully taken delivery of the LeFu LF1736-B4 Warm & Cold Flatbed Applicator (working size 1600×3200 mm / 5×10 ft). The machine arrived in excellent condition, was unloaded and assembled with our remote guidance, and has already entered production for rigid-board mounting and wide-format lamination.
The LF1736-B4 is a heavy-duty flatbed laminating and mounting machine engineered for sign shops, exhibition display producers, and commercial print finishers working with oversized flexible media and rigid substrates.
Model LF1736-B4 Warm & Cold Flatbed Applicator
Max Lamination Width: 1600 mm / 62.99″ / 5.24 ft
Max Lamination Length: 3200 mm / 125.98″ / 10.49 ft
Table Overall Size: 1600×3200 mm
Max Substrate Thickness: 50 mm / 1.96″
Lamination Temperature: 0–60°C (Cold & Warm)
Upper Roller: Φ130 mm High-Temp Silicone Roller
Pressure / Height Adjust: Pneumatic (requires air compressor)
Heating Method Infrared pre-heating: 10–15 min warm-up
Control Panel: Front Intelligent LCD – temp & pressure settings
Special Features Tilt table, rear media roll holder, safety glass bed, LED illumination (optional)
Power 1800 W, AC 110V–240V, 50/60 Hz
Certification CE / ROHS
Packaging & Door to Door Service Shipping to Switzerland
The machine was factory-inspected (FAT), then packed in a reinforced wooden export crate with shock-absorbing padding to protect the glass bed and silicone roller during ocean/land transport.
Full export documentation—commercial invoice, packing list, bill of lading, and CE certificate—was provided to assist with Swiss customs clearance.
Upon arrival, the customer used a forklift to unload the crate. The tilt-table section and control box were pre-assembled inside the crate to minimize on-site setup time.
Our technical team conducted a video-call installation guide, walking the customer through:
Removing transport locks & braces
Connecting shop air (pneumatic system)
Leveling the machine
First-run calibration & test lamination on foam board
Application Scenarios
The Swiss customer primarily uses the LF1736-B4 for:
Mounting solvent / eco-solvent / latex prints onto foam board, PVC board, ACM (aluminum composite), acrylic, MDF
Cold lamination of large-format posters, banners & wall graphics
Warm lamination (≤60°C) for thermal laminating films requiring light heat activation
Bubble-free, wrinkle-free finishing on boards up to 50 mm thick
Typical daily throughput includes 5×10 ft mounted signage for retail chains and exhibition stands.
Customer Feedback
“The table is installed, and I want to thank you and your team from the bottom of my heart. From our very first contact through delivery and even the support afterwards, you all did excellent work. Thank you so much!”
— Swiss Customer, Sign Production Manager
LeFu Global Support
Every LeFu flatbed applicator ships with:
Export-standard reinforced wooden crate
Full documentation (manual, wiring diagram, CE cert)
Remote installation & operator training via video
24 month warranty on main components (varies by region)
Spare parts available ex-works
This successful delivery to Switzerland reinforces LeFu’s capability to serve wide-format professionals across Europe, North America, the Middle East, and beyond.
