Home > News


Home > News

Lefu 1700-D3 Laminator’s New Color:Blue

2023-10-10 17:22:27

If you have a new Lefu 1700-D3 laminator that comes in a blue color, congratulations! Here are some general steps to use your blue Lefu 1700-D3 laminator:

LF1700-D3 Semi-auto Laminator (8 m/min)
Model: LF1700-D3 Semi-auto Laminator
Max Lamination Width: 1630mm/64″
Lamination Temp: 0~60°C/0~140°F (0~120°C/0~248°F Optional)
Max Lamination Speed: 18 M/Minute
Roller Up and Down: Pneumatic Pressure

Familiarize yourself with the user manual: Read the user manual that comes with your blue Lefu 1700-D3 laminator to understand its specific features, settings, and any safety precautions.

Plug in and power on: Connect your blue Lefu 1700-D3 laminator to an appropriate power source and switch it on. Allow it some time to heat up, as it may require a warm-up period before use.

Adjust temperature and speed settings: Depending on the type and thickness of the materials you’ll be laminating, adjust the temperature and speed settings accordingly. These settings can usually be adjusted using buttons or dials on the Lefu 1700-D3 laminator’s control panel.

Prepare your materials: Ensure that the items you want to laminate, such as documents, photos, or stickers, are clean and free from dust or debris. Trim them to the desired size if needed.

Feed the material into the Lefu 1700-D3 laminator: Open the Lefu 1700-D3 laminator’s feed tray or entrance and carefully insert the materials to be laminated. Make sure they are aligned properly and evenly.

Guide the material through the machine: Once the material is inserted, gently guide it through the Lefu 1700-D3 laminator. Some Lefu 1700-D3 laminators have guides or adjustable feed trays to help ensure straight and even feeding.

Collect the laminated material: As the laminated item exits the Lefu 1700-D3 laminator, carefully collect it on the other side to prevent it from folding or curling. Use caution when handling as it may still be hot.

Allow cooling and trimming: After laminating, give the material some time to cool down and set. Once cooled, you can trim any excess laminate using scissors or a paper cutter if desired.

Remember to always follow the manufacturer’s instructions and recommended guidelines for your specific blue Lefu 1700-D3 laminator model. This will help ensure safe and proper use, as well as prolong the lifespan of your Lefu 1700-D3 laminator. Enjoy using your new blue Lefu 1700-D3 laminator!

Home Tel Mail Inquiry