To use a Lefu 1700-D2 Laminator correctly, you can follow these general steps:
Read the instructions: Familiarize yourself with the Lefu 1700-D2 Laminator’s user manual or instructions provided by the manufacturer. This will help you understand its specific features, settings, and any safety precautions.
LF1700-D2 Auto Laminator (28 m/min)
Model: LF1700-D2 Automatic Roll Laminator
Rear Trimmer: 3 Pcs
Max Lamination Width: 1630mm/64″
Lamination Temp: 0~60°C/0~140°F (0~120°C/0~248°F Optional)
Max Lamination Speed: 28 M/Minute
Roller Up and Down: Pneumatic Pressure
Prepare the Lefu 1700-D2 Laminator: Ensure that the Lefu 1700-D2 Laminator is clean and free of any debris. Check if there are any necessary adjustments or settings to be made based on the thickness or type of laminating pouch or film you will be using.
Preheat the Lefu 1700-D2 Laminator: If your Lefu 1700-D2 Laminator requires preheating, turn it on and allow it to reach the recommended operating temperature. This may take a few minutes depending on the model.
Load the laminating pouch or film: Open the laminating pouch or roll and insert your document or item. Make sure it is positioned properly within the pouch, leaving a small border around the edges for proper sealing.
Feed the pouch into the Lefu 1700-D2 Laminator: Place the end of the pouch (sealed side first) into the entry slot or feeder of the Lefu 1700-D2 Laminator. Ensure that the leading edge is properly guided and aligned with the machine’s rollers.
Guide the pouch through the Lefu 1700-D2 Laminator: Slowly and steadily feed the pouch through the Lefu 1700-D2 Laminator while applying gentle and even pressure. Use the guides or alignment markers on the Lefu 1700-D2 Laminator to keep the pouch straight and aligned.
Collect the output: Once the pouch has passed through the Lefu 1700-D2 Laminator, allow it to exit completely before removing it. Be cautious as it may still be hot. Place the laminated item on a flat surface and let it cool and set.
Repeat if necessary: If you have additional items to laminate, repeat the process from step 4 onwards, ensuring that the Lefu 1700-D2 Laminator is still at the appropriate temperature.
Clean and store the Lefu 1700-D2 Laminator: After use, turn off the Lefu 1700-D2 Laminator and allow it to cool down. Clean any adhesive residue or debris from the machine using a soft cloth or cleaning tool as per manufacturer instructions. Store the Lefu 1700-D2 Laminator in a safe and dry location.
Remember, these steps are general guidelines, and it is essential to refer to the specific instructions provided by your Lefu 1700-D2 Laminator’s manufacturer for accurate usage and safety information.
